Rod Ends Series K  -  Heavy Duty
Series GIS
Rod Ends with female thread made from free-cutting or heat-treated steel, zinc plated and fitted with a grease nipple










Especially suited for high speed applications
Size
(D)
B M A F L K J O SW G GL Static
load Co kN
Dynamic
load
C   kN
Limiting
speed
rev/min
Weight
g
2¹ 4,5 3,60 9 16 20,5 4,5 3,8 2,6 4,0 M 2 7 3,0 1,1 3
3¹ 6,0 4,50 14 21 27,0 6,5 5,0 5,1 5,5 M 3 10 4,1 1,8 6
5 8,0 6,00 18 27 36,0 11,0 9,0 7,7 9,0 M 5 10 8,0 3,3 1200 18
6 9,0 6,75 20 30 40,0 13,0 10,0 8,9 11,0 M 6 12 8,9 4,3 1500 27
8 12,0 9,00 24 36 48,0 16,0 12,5 10,4 13,0 M 8 16 14,1 7,1 1200 46
10 14,0 10,50 28 43 57,0 19,0 15,0 12,9 17,0 M 10 20 19,3 10,0 1000 76
12 16,0 12,00 32 50 66,0 22,0 17,5 15,4 19,0 M 12 22 23,5 13,5 860 115
14 19,0 13,50 36 57 75,0 25,0 20,0 16,8 22,0 M 14 25 21,0 17,0 750 170
16 21,0 15,00 42 64 85,0 27,0 22,0 19,3 22,0 M 16 28 32,0 21,5 660 230
18 23,0 16,50 46 71 94,0 31,0 25,0 21,8 27,0 M 18x1,5 32 38,5 26,0 600 320
20 25,0 18,00 50 77 102,0 34,0 27,5 24,3 32,0 M 20x1,5 33 44,0 31,5 540 415
22 28,0 20,00 54 84 111,0 37,0 30,0 25,8 32,0 M 22x1,5 37 53,0 38,0 500 540
25 31,0 22,00 60 94 124,0 42,0 33,5 29,6 36,0 M 24x2 42 62,0 47,0 440 750
30 37,0 25,00 70 110 145,0 51,0 40,0 34,8 41,0 M 30x2 51 82,0 64,0 370 1130
35 43,0 28,00 80 125 165,0 56,0 46,0 37,7 50,0 M 36x2 56 101,0 80,0 330 1600
40 49,0 35,00 90 142 187,0 69,0 57,0 44,2 60,0 M 42x2 60 124,0 116,0 290 2770
50 60,0 45,00 116 160 218,0 78,0 65,0 55,9 65,0 M 48x2 65 308,0 185,0 230 5000

Materials:

Housing: uo to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13
from size 14 forged from heat-treated steel to C22, M1023
size 50 turned from heat-treated steel to C45, Aisi 1045
Insert: special high strength bronze to  CuSn8
Ball: bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished
This series is also available sealed (-2RS) or with threaded bolt (-BO)
Cetop connections see G...-CETOP
¹ without lubrication fitting