Rod Ends Motor Sport Maintenance Free
Series

GAXSW..MS


Rod Ends with male thread made from heat-treated steel, nickel plated with PTFE-liner, maintenance free.
Preloaded bearing









For use at highest dynamic pressure and tension loads in corrosive environments
Description DH7 B M A F L O G GL static radial
load Co kN
dynamic radial
load
C kN
torque
N/dm
a weight
g
GAXSW
6 MS
6 9 6,75 20 36 46 8,9 M 6x1 21 9,8 9,8 4-10 13° 20
GAXSW
8 MS
8 12 9,00 24 42 54 10,4 M 8x1,25 25 19,5 19,5 4-12 14° 33
GAXSW
8x1 MS
8 12 9,00 24 42 54 10,4 M 8x1 25 19,5 19,5 4-12 14° 33
GAXSW
10 MS
10 14 10,50 28 48 62 12,9 M 10x1,5 28 31,4 28,1 6-16 13° 56
GAXSW 10x1,25 MS 10 14 10,50 28 48 62 12,9 M 10x1,25 28 31,4 28,1 6-16 13° 56
GAXSW
10x1 MS
10 14 10,50 28 48 62 12,9 M 10x1 28 31,4 28,1 6-16 13° 56
GAXSW
12 MS
12 16 12,00 32 54 70 15,4 M 12x1,75 32 42,0 38,4 10-22 13° 87
GAXSW 12x1,5 MS 12 16 12,00 32 54 70 15,4 M 12x1,5 32 42,0 38,4 10-22 13° 87
GAXSW 12x1,25 MS 12 16 12,00 32 54 70 15,4 M 12x1,25 32 42,0 38,4 10-22 13° 87
GAXSW
14 MS
14 19 13,50 36 60 78 16,8 M 14x2 38 57,0 50,5 12-24 16° 129
GAXSW 14x1,5 MS 14 19 13,50 36 60 78 16,8 M 14x1,5 38 57,0 50,5 12-24 16° 129
GAXSW
16 MS
16 21 15,00 42 66 87 19,3 M 16x2 40 67,0 63,0 14-28 15° 189
GAXSW 16x1,5 MS 16 21 15,00 42 66 87 19,3 M 16x1,5 40 67,0 63,0 14-28 15° 189
GAXSW
18 MS
18 23 16,50 46 72 95 21,8 M 18x1,5 44 81,5 76,5 18-32 15° 267
GAXSW
20 MS
20 25 18,00 50 78 103 24,3 M 20x1,5 47 93,5 93,5 20-34 14° 348
GAXSW
25 MS
25 31 22,00 60 94 124 29,6 M 24x2 58 135,0 135,0 34-52 15° 600


Rod ends with reduced bore:

Description DH7 B M A F L O G GL static radial
load Co kN
dynamic radial
load
C kN
torque
N/dm
a¹ weight
g
GAXSW
10.8 MS
8 14 10,50 28 48 62 12,9 M 10x1,5 28 31,4 28,1 6-16 13° 56
GAXSW
12.10 MS
10 16 12,00 32 54 70 15,4 M 12x1,75 32 42,0 38,4 10-22 13° 87
GAXSW
14.12 MS
12 19 13,50 36 60 78 16,8 M 14x2 38 57,0 50,5 12-24 16° 129
GAXSW
16.14 MS
14 21 15,00 42 66 87 19,3 M 16x2 40 67,0 63,0 14-28 15° 189
GAXSW
18.16 MS
16 23 16,50 46 72 95 21,8 M 18x1,5 44 81,5 76,5 18-32 15° 267

Materials:

Housing: Heat-treated steel to 42CrMo4, Aisi 4140, forged, polished, nickel plated with high polish finish
Insert: Stainless steel to 1.4571, Aisi 316Ti with PTFE liner bonded to the inner surface
Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface
Clearance: preloaded, zero tolerance
On request: with left hand thread, threaded bolt and further sizes are available
¹ The reduced bore diameter offers to the engineer the possibility to construct a bearing with a very high pivoting angle, especially when a minimal shaft collar is used (in some cases twice as high as standard listing).